ferry
“Sale”Splcier Fujikura 21s,70s,80s *Harga Grosiran*..!!!!!
Fujikura 80S Fusion Splicer is core-to-core alignment single fiber splicer, which is designed for splicing single-count optical fibers: SM (G.652/657), MM (G.651), DSF (G.653), NZDSF (G.655) for telecommunication use, PON/FTTx networks, etc.
Fujikura 80S model is successor of the famous series of splicers: Fujikura FSM-60S and FSM-50S. The new design streamlines the steps required to complete splices, resulting in greater productivity. “Configurable automation” features allow you to customize the operation of the machine to best suit your particular splicing technique and process. Splicing takes only 7 seconds, and heating takes only 14 seconds.
The device is optimized for splicing under severe weather conditions, it is protected from stress and shock. It may be powered from 200 V AC, or using a battery (included). For user comfort the package contains a convenient working table, where you may place the needed tools: a cleaver, a stripper, sleeves, etc.
Features
• Splices all known types of fibers.
• Fiber core alignment.
• Typical average splice loss for single mode cable with G.652D fiber is only 0.02 dB.
• Reduced splicing time – 7 seconds only.
• Heating time – 14 seconds only.
• Increased electrode lifetime – up to 3000 splicing cucles with one set, without splicing quality loss.
• Battery life increased up to 200 full splicing/heating cycles.
• Rotary color anti-glare LCD 4.73″, high contrast and vividness.
• Simultaneous display of X and Y axes.
• May splice SC, LC, MPO connectors.
• Automatic: wind-protective lid, heater, fiber holders.
• Increased water, dust and shock resistance, may be used under severe environment conditions.
• Automatic arc calibration.
• Battery BTR-09 is included.
• New comfortable carrying case, optimized for quick operation start.
• The case may be used as a working table.
• Operation manual is installed into the splicer.
• Software update option.
• 2 years of full warranty with the device replacement.
GARANSI RESMI 1 TAHUN…..!!! DAPATKAN HARGA SPECIAL UNTUK PEMBELIAN 2 Unit…
Semua Barang kami BERGARANSI RESMI dan Harga pun Relatif MURAH.
Note:
– Bebas biaya antar untuk wilayah Tangerang, Jakarta, dan Depok
– Menerima Pengiriman Luar Kota maupun Luar jawa
– Barang yang kami jual NEW 100% dan bergaransi resmi selama 1th.
– Dapatkan harga miring untuk pembelian lebih dari 2 Unit.
Kami pun menerima REPAIR semua macam merk SPLICER dan alat TELKOM lainnya.
Contact Person:
Ferry
______________________
PT. Panca Wahyu Mandiri
Ph : 021-55782056 – 021- 55782057
Fax : 021-55782058
Mobile : 081314666889
Webs: www.indonetwork.co.id/alatfiberoptic
www.pancawahyumandiri.com
www.pancawahyumandiri.co.id
Ruko Metropolis Town Square Jl. Hartono Raya, Blok GG-2 No.5
Modernland – Tangerang 15117, Banten
Indonesia
Otdr Yokogawa AQ-1200,7275,7280 Harga Beda Dari Yang Lain…!!!!
The AQ7275 is one of the best selling OTDRs in the world. Enhancements include a PON option allowing accurate event analysis after a 1×32 splitter with significantly reduced undershoot effects. Also unique to the industry is a built-in section of launch fiber to eliminate the need for a separate launch box.
Yokogawa offers AQ7275 OTDR models to suit your changing needs:
Wide Range of Modules Available
Enhanced support of FTTH to Metro, Core Network
High Dynamic Range ( 45dB)
Short Dead Zone ( 0.8 m)
Optional built in Dummy Fiber
Yokogawa AQ7275 OTDR Features:
USC Universal Connector: SC
HE English + European languages
UL and CSA Standard ( 2P)
Power Monitor ( Power meter) function
Stabilized Light Source
Visible Light Source
Built-in Dummy fiber
Quick Startup within 10 Seconds
Short dead zone ( 0.75 m)
High dynamic range ( 45 dB)
Supporting FTTH to core networks
Convenient Data Management and Diagnostic Functions
New Macro Bending Function
New Scheduling Function
Multi Fiber Measurement Function
1 Year Warranty
GARANSI RESMI 1 TAHUN…..!!! DAPATKAN HARGA SPECIAL UNTUK PEMBELIAN 2 Unit…
Semua Barang kami BERGARANSI RESMI dan Harga pun Relatif MURAH.
Note:
– Bebas biaya antar untuk wilayah Tangerang, Jakarta, dan Depok
– Menerima Pengiriman Luar Kota maupun Luar jawa
– Barang yang kami jual NEW 100% dan bergaransi resmi selama 1th.
– Dapatkan harga miring untuk pembelian lebih dari 2 Unit.
Kami pun menerima REPAIR semua macam merk SPLICER dan alat TELKOM lainnya.
Contact Person:
Ferry
______________________
PT. Panca Wahyu Mandiri
Ph : 021-55782056 – 021- 55782057
Fax : 021-55782058
Mobile : 081314666889
Webs: www.indonetwork.co.id/alatfiberoptic
www.pancawahyumandiri.com
www.pancawahyumandiri.co.id
Ruko Metropolis Town Square Jl. Hartono Raya, Blok GG-2 No.5
Modernland – Tangerang 15117, Banten
Indonesia
“Gudangnya” Alat Splicer Sumitomo Z1C Hanya Di Pawama Harga Irit!!
The Sumitomo’ s Z1C is the future of splicing machine market due to its following features ultra fast splicing ( 7 sec) , ultra fast heating ( 28 sec) , low on its maintainces, touch screen, user friendly, universal clamps, automatic arc calibration, low weight, high data storage, shock resistance, water resistance, dust resistance, 64 images/ 10000 data storage capacity, provide 200* splice & heat cycle, remote upgradation, 300 splicing programs and 100 heating programs etc.
The fiber profile supported by Z1C are SMF ( ITU-T G.652) , MMF ( ITU-T G.651) . DSF ( ITU-T G.653) , NZDSF ( ITU-T G.655) . Z1C has a cladding diameter of 80 µ m – 150 µ m with a coating diameter of 100 µ m – 1, 000 µ m. The cleave length of 81C is 5 – 16 mm. It can work at an altitude of 6, 000m at temperature of -10 ~ + 50 ° C and 95 % of humidity.
Features:
• Splicing Machine with Touch screen operation
• Ultra fast splicing( 7sec.) , Ultra fast heating( 28sec.)
• G.657 fiber auto splicing function
• IP52 rating and 76cm drop on 5 faces
• Automatic arc calibration
• Universal clamp for 250µ m, 900µ m tight and loose buffer fiber
• User selectable heater clamp operation
• Support bi-directional splicing operation
• Equipped with onboard training video
• Upgrades software via internet
• 2.1kg weight with battery
GARANSI RESMI 1 TAHUN…..!!! DAPATKAN HARGA SPECIAL UNTUK PEMBELIAN 2 Unit…
Semua Barang kami BERGARANSI RESMI dan Harga pun
Relatif MURAH.
Note:
– Bebas biaya antar untuk wilayah Tangerang, Jakarta, dan Depok
– Menerima Pengiriman Luar Kota maupun Luar jawa
– Barang yang kami jual NEW 100% dan bergaransi resmi selama 1th.
– Dapatkan harga miring untuk pembelian lebih dari 2 Unit.
Kami pun menerima REPAIR semua macam merk SPLICER dan alat TELKOM lainnya.
Contact Person:
Ferry
______________________
PT. Panca Wahyu Mandiri
Ph : 021-55782056 – 021- 55782057
Fax : 021-55782058
Mobile : 081314666889
Webs: www.indonetwork.co.id/alatfiberoptic
www.pancawahyumandiri.com
www.pancawahyumandiri.co.id
Ruko Metropolis Town Square Jl. Hartono Raya, Blok GG-2 No.5
Modernland – Tangerang 15117, Banten
Indonesia
**Disini aja Gan!!kalau mau Repair alat Fiber Optic&Alat ukur Lainnya!!!
Selain menjual alat ukur “Panca Wahyu Mandiri” juga bergerak di bidang jasa servis, Kalibrasi dan Rental alat ukur BTS. diantaranya:
• Spectrum analyzer Teronix, Agilent, Anritsu, Advantest.
• Signal Generator Tekronix, Agilent, Anritsu, Advantest.
• Osiloscop Textronix, Anritsu.
• Site Master Anritsu S331D, S332D, S331L, S331E, S332L.
• OTDR Yokogawa AQ- 1200 AQ-7270, AQ-7275 Anritsu MT-9083, Intellity OPX-150 Series
• Splicer Fujikura 18r, 50s, 60s, Sumitomo T-39, 81c, Fitel S-177, Fitel S-178, INNO IFS-10, IFS-15, JiLong KL-280, KL-300 DVP-730, Ilsintech DLL
• Power Meter Bird 5000EX, 5012
• Bertest Sunlite E1, Sunset MTT
• Alat-alat Laboratorium.
Ditunjang dengan merk-merk yang sudah terkenal dan telah diakui keberadaanya didunia survey diantaranya: Tektonix, Agilent, Advantest, Anritsu, Rohde&Scward, Advantes, Fujikura, Yokogawa, Sumitomo, EXFO, JDSU, FITEL, INNO, Ilsintech, Sunrice Telecom, Bird, Leica, Topcon, Nikon, Fisher Labs, Spectra, Epoch dll.
Teknisi kami telah menjadi ahli dalam memperbaiki hampir setiap jenis dan merek uji dan peralatan pengukuran. Kirimi kami peralatan alat ukur rusak Anda dan optik untuk evaluasi pada biaya tetap rendah. Setelah selesai, Anda akan menerima diagnostik dan rekomendasi. Dengan asumsi bahwa peralatan bernilai perbaikan. Kami akan menunggu penerimaan atau penolakan sebelum memulai tindakan lebih lanjut.
Semua Barang kami BERGARANSI RESMI dan Harga pun Relatif MURAH.
Note:
– Bebas biaya antar untuk wilayah Tangerang, Jakarta, dan Depok
– Menerima Pengiriman Luar Kota maupun Luar jawa
– Barang yang kami jual NEW 100% dan bergaransi resmi selama 1th.
– Dapatkan harga miring untuk pembelian lebih dari 2 Unit.
Kami pun menerima REPAIR semua macam merk SPLICER dan alat TELKOM lainnya.
___________________
Contact Person:
Ferry : 0813.1466.6889
Office : 021- 5578.2056- 57 Ext 105
Email : Ferry_pwm14@yahoo.com
Website : www.pancawahyumandiri.com
**Splicer Fujikura 70s,80s,21s**||BIG SALE Hanya di Pawama!!!
Fujikura 80S Fusion Splicer is core-to-core alignment single fiber splicer, which is designed for splicing single-count optical fibers: SM (G.652/657), MM (G.651), DSF (G.653), NZDSF (G.655) for telecommunication use, PON/FTTx networks, etc.
Fujikura 80S model is successor of the famous series of splicers: Fujikura FSM-60S and FSM-50S. The new design streamlines the steps required to complete splices, resulting in greater productivity. “Configurable automation” features allow you to customize the operation of the machine to best suit your particular splicing technique and process. Splicing takes only 7 seconds, and heating takes only 14 seconds.
The device is optimized for splicing under severe weather conditions, it is protected from stress and shock. It may be powered from 200 V AC, or using a battery (included). For user comfort the package contains a convenient working table, where you may place the needed tools: a cleaver, a stripper, sleeves, etc.
Features
• Splices all known types of fibers.
• Fiber core alignment.
• Typical average splice loss for single mode cable with G.652D fiber is only 0.02 dB.
• Reduced splicing time – 7 seconds only.
• Heating time – 14 seconds only.
• Increased electrode lifetime – up to 3000 splicing cucles with one set, without splicing quality loss.
• Battery life increased up to 200 full splicing/heating cycles.
• Rotary color anti-glare LCD 4.73″, high contrast and vividness.
• Simultaneous display of X and Y axes.
• May splice SC, LC, MPO connectors.
• Automatic: wind-protective lid, heater, fiber holders.
• Increased water, dust and shock resistance, may be used under severe environment conditions.
• Automatic arc calibration.
• Battery BTR-09 is included.
• New comfortable carrying case, optimized for quick operation start.
• The case may be used as a working table.
• Operation manual is installed into the splicer.
• Software update option.
• 2 years of full warranty with the device replacement.
GARANSI RESMI 1 TAHUN…..!!! DAPATKAN HARGA SPECIAL UNTUK PEMBELIAN 2 Unit…
Semua Barang kami BERGARANSI RESMI dan Harga pun Relatif MURAH.
Note:
– Bebas biaya antar untuk wilayah Tangerang, Jakarta, dan Depok
– Menerima Pengiriman Luar Kota maupun Luar jawa
– Barang yang kami jual NEW 100% dan bergaransi resmi selama 1th.
– Dapatkan harga miring untuk pembelian lebih dari 2 Unit.
Kami pun menerima REPAIR semua macam merk SPLICER dan alat TELKOM lainnya.
Contact Person:
Ferry
________________________________________________________________________
PT. Panca Wahyu Mandiri
Ph : 021-55782056 – 021- 55782057
Fax : 021-55782058
Mobile : 081314666889
Webs: www.indonetwork.co.id/alatsurvey_gps
www.pancawahyumandiri.com
www.pancawahyumandiri.co.id
Ruko Metropolis Town Square Jl. Hartono Raya, Blok GG-2 No.5
Modernland – Tangerang 15117, Banten
Indonesia
Hosting Website & Domain Services
