The Topcon DT-207 Digital Theodolite mengintegrasikan berkualitas tinggi yang sama maju membaca lingkaran teknologi mutlak ditemukan dalam performa tinggi produk total station Topcon untuk perhitungan lapangan yang lebih akurat; dan mereka terus memberikan optik kualitas tertinggi dan elektronik Anda harapkan untuk menemukan di Topcon theodolites.

fitur:
150 jam operasi di Angle Pengukuran Mode pada baterai 4AA – lebih baik daripada model lain!
Kecepatan dan akurasi selection
Vertical koreksi sudut menyediakan 7 ” akurasi
besar, kontras tinggi, kembali menyalakan layar LCD
Compact, ringan, set up dalam hitungan detik
Operasi sederhana – sisi tampilan tunggal
menangani Removable
360 berputar teleskop
Ganda cepat-pemandangan: atas dan bawah dari teleskop
Air bukti dan debu
Built-in tribrach dengan gelembung vial

Theodolite Topcon DT 209

DT-209 Features:

9-Second Accuracy,
26x Magnification,
Optical Plummet,
Waterproof and Dustproof Digital Theodolites
140-Hour Battery Life.
5 Year Manufacturers Warranty.
SPECIFICATIONS

Telescope

Length 149 mm
Objective lens 45 mm
Magnification 30x power
Field of view 1°30′
Resolving power 2.5 power
Minimum focus 90 cm
Stadia ratio 100
Stadia constant 0
Sighting collimator Double
Electronic Angle Measurement

Method Absolute Reading
Detecting 2 horizontal sides, 1 vertical sides
Minimum reading 1″/5″ arc seconds, 0.2mgon/1mgon mgon
Accuracy 5 arc seconds, 71mm Diameter Circle
LCD 7 segments
Compensator

Sides 2
Serial signal connector RS-232C
Tilt sensor Vertical
Data Output

Serial signal connector RS-232C
Optical Plummet Telescope

Magnification 3x power
Field of view 3° degrees
Level Sensitivity

Plate level 40°/2mm
Circular level 10°/2mm
Water Protection

Standard IP66 rating
Power Supply

Battery 4AA batteries
Operating time Alk.

Theodolite only 140 Hours
Environmental
Operating Temp -20 to +50 degrees C

ILSINTECH SWIFT KF4
Swift KF4 is very versatile and super accurate active cladding alignment fusion splicer that satisfies every aspect of splicing requirement. With slim, yet rugged and extremely light, budget priced Swift KF4 assures users of convenient and stable process as well as high performance.
BENEFITS AND FEATURES
Compact, Lightweight and Convenient
Best Active Cladding Alignment fusion splicer with slim and light form factor
Size : 124(W) × 189(L) × 75(H) mm, Weight : 1.1 kg (Including battery)
Splicing time : 7 sec, Heating : 13 sec (IS-60 mode, IS-60 sleeve)
With Work Table, maximizing the work efficiency.

Resistance to Shock, Dust and Water
The splicer with high reliability has stable performance even in a harsh environment.
Shock – Free Fall : 76cm, Waterproof : IPx2, Dustproof : IP5x

Resistance Wide LCD : 4.3 Inch
Heater Crystal clear and wide 4.3″ LCD.

Category Description
Fiber alignment Active V-Groove Alignment
Applicable type of fibers 0.25mm, 0.9mm, 2.0mm, 3.0mm, Indoor cable
Fiber count Single fiber
Applicable fiber dimensions Cladding diameter: 125㎛ / Coating diameter: 150㎛~3mm
Fiber setting and cleaved length 5mm to 16mm
Splicing modes Splice mode: 300, Heater mode:100
Typical Splice Loss SM: 0.02dB, MM: 0.01dB, DS: 0.04dB, NZDS: 0.04dB
Return loss > 60dB
Splicing Time Typical 7sec (Standard SM, SM-SM mode)
Splice loss estimate Available
Sleeve heating time Typical 13sec with IS-60 mode, IS-60 sleeve
Applicable protection sleeve 40mm,60mm and micro sleeves
Storage of splice result Date : 5,000 Up to, Image: 5,000 Up to
Tension test 1.96N to 2.25N
Operating condition Altitude: 5,000m above sea level, Temperature: -10℃~50℃, Humidity: 0~95%,
Wind: 15m/s, non-condensing, dust proof, water proof, shock proof
Storage condition Temperature: -40℃~80℃, Humidity: 0~95%
Dimension 124(W)ｘ189(L)ｘ75(H)mm(Without rubber protector)
Weight 1.1kg(Including battery)
Viewing method and display Two CMOS cameras and 4,3-inch color LCD monitor
Fiber view and magnification X/Y : 130X MAX:260X
Power supply Li-ion Battery(DC 14.8V, 3400mAh), 100 ~ 240V AC Charger
No.of splice cycles with battery Typical 200 cycles
Electrode life More than 3,000 times
Terminals USB

Semua Barang kami Bergaransi Resmi dan Harga pun
Relatif Murah.
Note:
– Bebas biaya antar untuk wilayah Tangerang, Jakarta, dan Depok
– Menerima Pengiriman Luar Kota maupun Luar jawa
– Barang yang kami jual NEW 100% dan bergaransi resmi.
– Dapatkan harga special untuk pembelian lebih dari 2 Unit.

Kami pun menerima REPAIR semua macam merk SPLICER, OTDR, Site Master dan alat TELKOM lainnya.
————————-
Contact Person :
Riefky Mahardika
Office :
PT. PANCA WAHYU MANDIRI
Ruko Mall METROPOLIS TOWN SQUARE Blok GG2 No. 5
Jl. Hartono Raya, Modernland Tangerang 15117
Telp / HP : – (021) 55782056 – 57 (Ext.105)
– 081287742809 (WhatsApp)
Facebook : Riefky Pawama
Fax : (021) 55782058
E_Mail : riefky_pwm23@yahoo.com
http://indonetwork.co.id/mediatelkomunikasi/
Web : www.pancawahyumandiri.co.id

Authorized Dealer Resmi MESIN PERFORASI KERTAS Merk:
PERNUMA, ABE & AMERICAN, CUMMINS PERFORATOR, AMS 36 Electric & Manual dan AMS 27 Electric, AMS 18 Manual,
AM-NEW 789 Electric & Manual double function.
PT. ANTARES MITRA SINERGI menawarkan Mesin Perforasi sebagai Pelindung Ekonomis untuk Keamanan Dokumen Penting Instansi anda dari Pemalsuan.
Bentuk perlindungannya berupa Tanda Cetak dari perforasi kertas dokumen
berupa Melubangi/Bolongan berbentuk Angka, Huruf, Logo atau Kombinasi dari ketiganya.
.
Mesin Perforasi Kertas/Perforating Machine berfungsi sbg Marking Documents Permanently
sangat berguna dalam hal marking/penandaan yg melubangi dokumen penting Anda.
.
Melayani Jasa Service mesin Perforator merk apa saja, pergantian Matris, Electrical dan Full Service Garansi 1 tahun.
.
Hubungi Sales Marketing ALI:
HP: 081210632399
Telp/Fax: 021-82413735
Email: antaresperforator@yahoo.co.id
Website: www.mesinperforator.com

SUMITOMO Z1C
The Z1C’s heater cycle time is only Approx.20 seconds (60mm Fiber protection sleeves) and a splice cycle of only Approx.6 seconds (Quick mode), the Z1C improves splicing efficiency and productivity dramatically, thereby reducing labor time and costs while increasing project and customer service turn-up.
The Z1C’s 4.1 inch LCD monitor with touch screen operation enables to confirm fiber images easily. The splicer can be operated by touching the icons on the screen. The working efficiency has improved.
The Z1C has environmental protection equivalent to IP52 waterproof and dust proof. Also has anti-shock rubbers around the machine to protect the splicer from dropping. Designed for portability, precision splicing, reliability, and speed — without foregoing affordability― the Z1C splicer is ideal for splicing applications in the central office or head end, the feeder portion of the FTTx network where speed in high fiber application is crucial, and at terminals leading to the final drop to premises or home.
For added convenience and functionality, the Z1C design includes a multi-position monitor that automatically change its view to accommodate front-to-back and back-to- front viewing for a vast array of splicing applications. The splicer is RoHS compliant.

Additionally, the splicer’s High–resolution Direct Core Monitoring (HDCM) image processing software, is used to perform core alignment and estimates splice loss for creating low-loss optical fiber splices with typical splice loss of less than 0.02dB for single-mode fiber and less than 0.01dB for multimode. Like other Sumitomo splicers, the Z1C is manufactured with durable metal rather than plastic materials predominantly used in the industry.
Highlights
• Compact & Lightweight with only 2.1 kg weight including battery
• Ultra fast splicing (6 sec.)
• Ultra fast heating (20 sec.)
• Dust-free, water resistant and shock-proof.
• Touch-screen operation
• Remote support via interne
• Upgrades software via internet

Semua Barang kami Bergaransi Resmi dan Harga pun
Relatif Murah.
Note:
– Bebas biaya antar untuk wilayah Tangerang, Jakarta, dan Depok
– Menerima Pengiriman Luar Kota maupun Luar jawa
– Barang yang kami jual NEW 100% dan bergaransi resmi.
– Dapatkan harga special untuk pembelian lebih dari 2 Unit.

Kami pun menerima REPAIR semua macam merk SPLICER, OTDR, Site Master dan alat TELKOM lainnya.
————————-
Contact Person :
Riefky Mahardika
Office :
PT. PANCA WAHYU MANDIRI
Ruko Mall METROPOLIS TOWN SQUARE Blok GG2 No. 5
Jl. Hartono Raya, Modernland Tangerang 15117
Telp / HP : – (021) 55782056 – 57 (Ext.105)
– 081287742809 (WhatsApp)
Facebook : Riefky Pawama
Fax : (021) 55782058
E_Mail : riefky_pwm23@yahoo.com
http://indonetwork.co.id/mediatelkomunikasi/
Web : www.pancawahyumandiri.co.id